The plastic box of the Superwinch Winch 2 Go Portable Winch # SW1140232 measures the following:
Length - 17-3/8"
Length with Handles - 19-1/2"
Width - 7-3/4"
Height - 7-1/2"
Attached is a photo to further demonstrate this. view full answer...
I went ahead and reached out to my contact at Adco, and he confirmed that the dimensions of the Adco Olefin HD All-Climate + Wind RV Cover # AD89ZR is 44' long x 8.8' wide x 11' high. view full answer...
Actually, if you scroll down the page a little, there is a photo showing the hole spacing.
The most important measurements are the width (side to side distance between the two bolt holes) as shown in the provided photo as well as the axle spacing. Given your axle spacing, the # K71-652-00 will work perfectly for you.
I've linked to an installation video you might find helpful. view full answer...
When we had an Alumi Tread Manual Pull OUt Step part # LC432696 in our photo room we found that the overall width of the mounting bracket was 27-3/4 inches. view full answer...